Difference between revisions of "Spiderboard Baseboard"
From spiderboard.org
(→Featureset) |
|||
Line 9: | Line 9: | ||
* simple baseboard in 2 layer design | * simple baseboard in 2 layer design | ||
* compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10 MX10 SoM]. | * compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10 MX10 SoM]. | ||
− | |||
* open hardware | * open hardware | ||
* MxM2 pcb edge connector | * MxM2 pcb edge connector | ||
* every pin of the MxM2 connector module is accessible at one of the pinheaders | * every pin of the MxM2 connector module is accessible at one of the pinheaders | ||
* large 25x15 .1” prototyping area | * large 25x15 .1” prototyping area | ||
− | * | + | * 4 PMOD compatible headers (2.5V or 3.3V supply voltage selectable) |
− | * | + | * 2 user push buttons |
* reset and power buttons | * reset and power buttons | ||
− | * | + | * 2 user LEDs |
* Arduino shield compatible interface | * Arduino shield compatible interface | ||
− | * | + | * Intel PSG Blaster compatible programming interfaces |
* USB mini B connector | * USB mini B connector | ||
* CR2032 cell holder | * CR2032 cell holder |
Revision as of 16:42, 5 December 2017
Contents
About Spiderboard Baseboard
The Spiderboard Baseboard is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.
Featureset
- simple baseboard in 2 layer design
- compatibility to the Spiderboard SoM as well as the MX10 SoM.
- open hardware
- MxM2 pcb edge connector
- every pin of the MxM2 connector module is accessible at one of the pinheaders
- large 25x15 .1” prototyping area
- 4 PMOD compatible headers (2.5V or 3.3V supply voltage selectable)
- 2 user push buttons
- reset and power buttons
- 2 user LEDs
- Arduino shield compatible interface
- Intel PSG Blaster compatible programming interfaces
- USB mini B connector
- CR2032 cell holder
- JST-2.0 lithium battery connector
- configuration jumpers (e.g. boot selection for MX10 module)
Block Diagram
Component Locations
Licenses
For more information about Licensing of the Spiderboard Baseboard please refer to Applicable Licenses
Downloads
The following components are available for download: