Difference between revisions of "Spiderboard Baseboard"
From spiderboard.org
(→Component Location) |
|||
Line 7: | Line 7: | ||
The Spiderboard baseboard features | The Spiderboard baseboard features | ||
+ | * simple baseboard in 2 layer design | ||
* compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10 MX10 SoM]. | * compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10 MX10 SoM]. | ||
− | * | + | * cheap two layer pcb design |
− | * | + | * open hardware |
− | * prototyping area | + | * MxM2 pcb edge connector |
− | * power | + | * every pin of the MxM2 connector module is accessible at one of the pinheaders |
− | * | + | * large 25x15 .1” prototyping area |
− | * | + | * 4x PMOD compatible headers (2.5V or 3.3V supply voltage selectable) |
+ | * 2x user push buttons | ||
+ | * reset and power buttons | ||
+ | * 2x user LEDs | ||
+ | * Arduino shield compatible interface | ||
+ | * PICkit and Altera Blaster compatible programming interfaces | ||
+ | * USB mini B connector | ||
+ | * CR2032 cell holder | ||
+ | * JST-2.0 lithium battery connector | ||
+ | * configuration jumpers (e.g. boot selection for MX10 module) | ||
= Block Diagram = | = Block Diagram = |
Revision as of 22:13, 13 November 2017
The Spiderboard Baseboard is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.
Featureset
The Spiderboard baseboard features
- simple baseboard in 2 layer design
- compatibility to the Spiderboard SoM as well as the MX10 SoM.
- cheap two layer pcb design
- open hardware
- MxM2 pcb edge connector
- every pin of the MxM2 connector module is accessible at one of the pinheaders
- large 25x15 .1” prototyping area
- 4x PMOD compatible headers (2.5V or 3.3V supply voltage selectable)
- 2x user push buttons
- reset and power buttons
- 2x user LEDs
- Arduino shield compatible interface
- PICkit and Altera Blaster compatible programming interfaces
- USB mini B connector
- CR2032 cell holder
- JST-2.0 lithium battery connector
- configuration jumpers (e.g. boot selection for MX10 module)