Spiderboard Baseboard
From spiderboard.org
Contents
About SpiderBase
The Spiderboard Baseboard (SpiderBase) is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.
Hardware
Featureset
- simple baseboard in 2 layer design
- compatibility to the Spiderboard SoM as well as the MX10 SoM.
- open hardware
- MxM2 pcb edge connector
- every pin of the MxM2 connector module is accessible at one of the pinheaders
- large 25x15 .1” prototyping area
- 4 Pmod compatible connectors (3.3V or 5V supply voltage selectable)
- 2 user push buttons
- reset and power buttons
- 2 user LEDs
- Arduino shield compatible interface
- Intel PSG Blaster compatible programming interfaces
- USB mini B connector
- CR2032 cell holder
- JST-2.0 lithium battery connector
- configuration jumpers (e.g. boot selection for MX10 module)
Block Diagram
Component Locations
Resources
Downloads
The following components are available for download:
License
The Spiderboard Baseboard is an Open Hardware. All design files are available under CERN_OHL_V1.2