Difference between revisions of "Spiderboard Baseboard"
From spiderboard.org
(→Downloads) |
|||
Line 40: | Line 40: | ||
The following components are available for download: | The following components are available for download: | ||
− | * [ | + | * [https://downloads.aries-embedded.de/products/Spiderboard/Baseboard/spiderboard_schematics_V2.0_2017-10-27.pdf PDF-Schematics] |
− | * [ | + | * [https://downloads.aries-embedded.de/products/Spiderboard/Baseboard/spiderboard_V2.0_project_2017-10-27.tar.gz KiCad Project Files] |
− | * [ | + | * [https://downloads.aries-embedded.de/products/Spiderboard/Baseboard/spiderboard_V2.0_bom_2017-10-27.csv Bill of Materials] |
− | * [ | + | * [https://downloads.aries-embedded.de/products/Spiderboard/Baseboard/spiderboard_V2.0_gerber_2017-10-27.tar.gz Gerber Data] |
==== License ==== | ==== License ==== | ||
The Spiderboard Baseboard is an Open Hardware. All design files are available under [[CERN_OHL_V1.2]] | The Spiderboard Baseboard is an Open Hardware. All design files are available under [[CERN_OHL_V1.2]] |
Latest revision as of 14:55, 27 May 2021
Contents
About SpiderBase
The Spiderboard Baseboard (SpiderBase) is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.
Hardware
Featureset
- simple baseboard in 2 layer design
- compatibility to the Spiderboard SoM as well as the MX10 SoM.
- open hardware
- MxM2 pcb edge connector
- every pin of the MxM2 connector module is accessible at one of the pinheaders
- large 25x15 .1” prototyping area
- 4 Pmod compatible connectors (3.3V or 5V supply voltage selectable)
- 2 user push buttons
- reset and power buttons
- 2 user LEDs
- Arduino shield compatible interface
- Intel PSG Blaster compatible programming interfaces
- USB mini B connector
- CR2032 cell holder
- JST-2.0 lithium battery connector
- configuration jumpers (e.g. boot selection for MX10 module)
Block Diagram
Component Locations
Resources
Downloads
The following components are available for download:
License
The Spiderboard Baseboard is an Open Hardware. All design files are available under CERN_OHL_V1.2