Spiderboard Baseboard

About SpiderBase

The Spiderboard Baseboard (SpiderBase) is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.

Hardware

Featureset

• simple baseboard in 2 layer design
• compatibility to the Spiderboard SoM as well as the MX10 SoM.
• open hardware
• MxM2 pcb edge connector
• every pin of the MxM2 connector module is accessible at one of the pinheaders
• large 25x15 .1” prototyping area
• 4 Pmod compatible connectors (3.3V or 5V supply voltage selectable)
• 2 user push buttons
• reset and power buttons
• 2 user LEDs
• Arduino shield compatible interface
• Intel PSG Blaster compatible programming interfaces
• USB mini B connector
• CR2032 cell holder
• JST-2.0 lithium battery connector
• configuration jumpers (e.g. boot selection for MX10 module)

Block Diagram

Component Locations

Resources

Downloads

The following components are available for download:

• PDF-Schematics
• KiCad Project Files
• Bill of Materials
• Gerber Data

License

The Spiderboard Baseboard is an Open Hardware. All design files are available under CERN_OHL_V1.2