Difference between revisions of "Spiderboard Baseboard"

From spiderboard.org
Jump to: navigation, search
(Component Location)
Line 7: Line 7:
 
The Spiderboard baseboard features
 
The Spiderboard baseboard features
  
 +
* simple baseboard in 2 layer design
 
* compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10  MX10 SoM].
 
* compatibility to the Spiderboard SoM as well as the [http://www.aries-embedded.de/?q=MX10  MX10 SoM].
* 4 Pmod slots
+
* cheap two layer pcb design
* Arduino Shield
+
* open hardware
* prototyping area
+
* MxM2 pcb edge connector
* power-/ reset- / user-buttons
+
* every pin of the MxM2 connector module is accessible at one of the pinheaders
* JTAG connector
+
* large 25x15 .1” prototyping area
* USB 2.0 port
+
* 4x PMOD compatible headers (2.5V or 3.3V supply voltage selectable)
 +
* 2x user push buttons
 +
* reset and power buttons
 +
* 2x user LEDs
 +
* Arduino shield compatible interface
 +
* PICkit and Altera Blaster compatible programming interfaces
 +
* USB mini B connector
 +
* CR2032 cell holder
 +
* JST-2.0 lithium battery connector
 +
* configuration jumpers (e.g. boot selection for MX10 module)
  
 
= Block Diagram =
 
= Block Diagram =

Revision as of 21:13, 13 November 2017

The Spiderboard Baseboard is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs.

Spiderboard-baseboard-bird.500x500.png

Featureset

The Spiderboard baseboard features

  • simple baseboard in 2 layer design
  • compatibility to the Spiderboard SoM as well as the MX10 SoM.
  • cheap two layer pcb design
  • open hardware
  • MxM2 pcb edge connector
  • every pin of the MxM2 connector module is accessible at one of the pinheaders
  • large 25x15 .1” prototyping area
  • 4x PMOD compatible headers (2.5V or 3.3V supply voltage selectable)
  • 2x user push buttons
  • reset and power buttons
  • 2x user LEDs
  • Arduino shield compatible interface
  • PICkit and Altera Blaster compatible programming interfaces
  • USB mini B connector
  • CR2032 cell holder
  • JST-2.0 lithium battery connector
  • configuration jumpers (e.g. boot selection for MX10 module)

Block Diagram

MX10 baseboard BD.png

Component Locations

Spiderbase components.png